Attention and Storage for Processing Plywood in Spring

Although spring is warmer than winter and drier than summer, it is also windy and sandy, with a dry climate. Any slight carelessness in these climate characteristics can have adverse effects on the processing of plywood. When processing plywood in spring, plywood manufacturers should first avoid strong winds, because strong winds can pick up dust on the ground, and the surface and adhesive layer of plywood will be contaminated with dust, resulting in weak bonding or dirty and messy surface, which is not conducive to the sales of plywood.

Manufacturers processing plywood in spring should also pay attention to the potential fire hazards caused by dry weather, as plywood is a flammable material. The warehouse where plywood manufacturers process plywood requires dryness and no open flames. Plywood workers are prohibited from smoking in the workshop, and sufficient fire-fighting equipment should be prepared to solve the fire. In addition, although the spring rain is not heavy, the impact of continuous spring rain is also significant. Therefore, Manufacturers should transfer outdoor boards to indoor areas before spring rain, and try not to process boards on rainy days to avoid moisture and reduced bonding ability.

The hot summer has arrived, and for manufacturers engaged in board production, such weather is suitable for producing various types of boards. However, plywood manufacturers also need to pay attention that the completed plywood should not be exposed to sunlight for a long time.

The plywood produced by pasting and bonding the boards according to standards is not as valuable as solid wood, but it has low production costs, is sturdy and durable, and is a good choice for making ordinary furniture and cabinets. Plywood manufacturers can provide consumers with various types of plywood, such as ecological boards, special grade boards, five plywood, etc. The types and specifications of plywood are very good, and the quality is also very good.

In summer, there are many hot weather conditions, which are conducive to the drying of plywood and also the peak period of plywood production. However, plywood manufacturers should not expose the completed boards to sunlight for a long time, which can easily lead to excessive drying and cracking of the boards. It is also easy to cause separation of the already glued boards, affecting the use effect and shortening the service life. When storing plywood in summer, it is advisable to choose a dry and dark place, away from water sources and open flames, and be safe and reliable.

Plywood is a type of board that is often used to make furniture, cabinets, etc. Although it is not as beautiful as solid wood and has collectible value, it is indeed very popular due to its lower cost. Plywood manufacturers produce large quantities of boards every day and store these boards in an outdoor environment in Linyi Plywood Factory.

Whether it is board or other products, as long as they are made from wood processing, they are prone to moisture, cracking, and other factors that affect their appearance and use. Although plywood manufacturers are well aware of this, due to limited warehouse space and the need for new boards to be dried and dehydrated, they still need to be stored in an outdoor environment for a period of time. During this period, manufacturers should closely monitor weather changes, Cover the board with plastic cloth in a timely manner on cloudy and rainy days, or transport the board indoors to avoid moisture and delamination.

Although the high temperature in summer can accelerate the evaporation of moisture in plywood, plywood that is exposed to sunlight for a long time is also prone to delamination. Therefore, plywood manufacturers should also pay attention to the influence of temperature when storing plywood outdoors. When the sunlight is too strong, try to reduce the time plywood is stored in an exposed environment.