Walnut Veneer Plywood

Black walnut veneer Plywood for furniture (4'x8')
Black Walnut Plywood available in full 48" x 96" sheets. This is a domestic unfinished plain sliced Walnut veneer plywood. Available in 3mm, 4mm 5mm, 6mm, 9mm, 12mm,15mm, 18mm, 21mm thickness.
The 1/4" thick sheet is a B-4 grade, considered Good on One Side. Front face is patch-free and sanded smooth that may contain a small blemish and therefore a B grade. Back side will have the same or similar veneer that may contain visible seams, veneer joints, or filled knots of a 4 grade. The B grade side is the stainable side.
The 1/2" and 3/4" thick sheets are a B-1 grade and considered Good on Two Sides. Front face is a clear and sanded smooth B grade that could have a small pin knot or minor blemish. The back face is similar wood and allows for only a minor blemish and that is clean enough to be seen. Both sides of this plywood are stain grade.
For smaller redi-cut sheets, please see: Walnut Plywood Redi-Cuts

Plain sliced walnut veneer sheets, also known as flat cut walnut veneers, are produced by thinly slicing walnut logs into pieces as wide as the log and then combining these pieces, matching grains, to make premium plywood faces and backs. These backs and faces are then used to sandwich numerous slices of birch hardwood into solid planks that can be used for a variety of wood projects, including furniture building, retail fixtures and architectural interiors.

All plywood are inspected one by one, and tested before loading. Only qualified plywood can be passed to loading container. We will show you online all pictures and video in whole process. Only when you said ok, then we will send you samples and pack it.

Packaging Details
1) Inner packing: Inside pallet is wrapped with a 0.20mm plastic bag. 2) Outer packing: Pallets are covered with 2mm package plywood or carton and then steel tapes for strengthening.

Hot Tags: walnut veneer plywood, China walnut veneer plywood manufacturers, factory