Plain Particle Board

Our particleboard is made of wood or other lignocellulosic materials, in the most advanced machine after the application of adhesives under the action of heat and pressure glued into the wood-based board, particleboard structure is more uniform, good processing performance, can be processed into large sheet according to need, is the production of different specifications, style of furniture better raw materials.

Chipboard data sheet: size 1220*2440mm 1830*2440mm 1830*3660mm or as clients request.
Glue: E0, E1
Density: 640-750kg/m³
Moisture: ≤8%
Water absorption rate: ≤10%

1. Material preparation section. The raw materials of ordinary particle board production line are chipped and screened before being sent to the wood chip bin for transition storage. The wood chips are transported to the planer for shavings preparation, and the shavings after preparation are transported to the wet shavings bin for transition storage.
2. Dry sorting grinding section. The wet shavings are sent to the rotor shavings dryer by conveyor for drying. The dried shavings pass through shavings sorting (screening) and the qualified core layer dry shavings are sent to the core layer dry shavings bin for transition storage. The large shavings are polished by the sander and then sent to the surface dry shavings bin for transition storage.
3. Glue dispensing section. The qualified surface core layer dry shavings are measured by conveyor and shavings measuring bin respectively and then sent to the glue mixing machine. At the same time, the glue section is adjusted to send the glue liquid required by the process to the glue mixing machine. The shavings and glue liquid are fully stirred by the surface core layer glue mixing machine to achieve the effect of uniform mixing and full sizing.
4. Paving hot pressing molding section (annual output of more than 30,000 production line). After sizing, the shavings are sent to the mechanical grading machine by belt conveyor, and the uniform slab is paved by the mechanical grading paving unit. The slab is sent to the loading cage of the plate loader through the processes of permanent magnet iron remover, prepress, longitudinal edge sawing machine, cross-cutting saw, accelerating conveyor, weighing conveyor, storage conveyor, loading conveyor, etc. By the loading cage, the slab is sent to the multi-layer hot press for hot press forming, and the hot press formed by the multi-layer hot press is pushed to the unloading machine by the tray of the loading trolley.
5. Post-processing section. The wool plate in the unloader is sent to the cooling inlet plate conveyor by the unloader, and the cooling inlet plate conveyor is sent to the cooling plate cooler for cooling. After staying (cooling) in the plate cooler, the rough plate is sent to the vertical and horizontal cutting machine by the cooling plate conveyor for edge cutting, and finally transported to the lifting platform by the dry plate transport machine for stacking.
6. Sanding section. The cooled and stacked particle board is sent to the sanding line for sanding, sorting and storage.

Hot Tags: plain particle board, China plain particle board manufacturers, factory